10'3" x 6' Pigeon loft

10'3" x 6' Pigeon loft for £750

Our pigeon lofts are constructed out of 112mm x 16mm 12mm after been machined T&G cladding and 30mm x 40mm frame, the roof is constructed out of 70mm x 45mm framing and 11mm OMB2 boarding and covered in green mineral felt, the floor is boarded out of 16mm boards. The loft will be stained with ronseal.It has 2 sliding doors and has air vents at the bottom of each door, twin polycarbonate windows with another 2 at the side of each door. Above each door there are doweld windows which open so the pigeons can have access to the loft and 2 more that dont open to each side. The back is in 2 sections and the side are in 2 sections for easy transportation and would fit into most vans. The size of the loft is 10’3" x 6’ but we can build these loft’s to any size so please send us a message for a quote. We are based in Leeds
Or call don on 0113 2635064

nice loft, but bit exspensive for a 10x6

HarryH wrote:nice loft, but bit exspensive for a 10x6

I tought £750 was abit exspensive I was thinkin £630 for this loft

your floor is boarded out what looks like chipboard not a very good idea for loft floor as that tends to sag real boards would be the best bet nice lofts though

administrator wrote:your floor is boarded out what looks like chipboard not a very good idea for loft floor as that tends to sag real boards would be the best bet nice lofts though

Thanks, what board is best to use?

steve0o0o27 wrote:

administrator wrote:your floor is boarded out what looks like chipboard not a very good idea for loft floor as that tends to sag real boards would be the best bet nice lofts though

Thanks, what board is best to use?

t@g floorboards 120mmx18 its cheaper than plywood but you have to get lenghts that will suit 5.1 4.8 4.2 3.9. 3.6 2.4 2.1 all them sizes put a add in local paper and guys on site will supply you with some

administrator wrote:

steve0o0o27 wrote:

administrator wrote:your floor is boarded out what looks like chipboard not a very good idea for loft floor as that tends to sag real boards would be the best bet nice lofts though

Thanks, what board is best to use?

t@g floorboards 120mmx18 its cheaper than plywood but you have to get lenghts that will suit 5.1 4.8 4.2 3.9. 3.6 2.4 2.1 all them sizes put a add in local paper and guys on site will supply you with some

Ok thanks ill check into it

i LIKE Plywood floors as they are easy to scrape out. But is not cheep.
Really nice looking well built lofts Steve.

Amanda

I PREFER CHIPBOARD TOUNGE AND GROVE. They dont sag easy to scrape and last long time,

the first loft i used it in was in 1982 and its still as good as the day it went down

hav always used it ever since, when you scrape ply wood and the laminate flakes it digs into scrapper and lifts, it also dont dry out as quick as chipboard

HarryH wrote:I PREFER CHIPBOARD TOUNGE AND GROVE. They dont sag easy to scrape and last long time,

the first loft i used it in was in 1982 and its still as good as the day it went down

hav always used it ever since, when you scrape ply wood and the laminate flakes it digs into scrapper and lifts, it also dont dry out as quick as chipboard

I think I know which type of board you mean, they come in 8'x 2' and have some kind of sealed coat on them.

steve if u wnt any ply wood for nowt let me knw i,ll take u dwn to the guy

Amar wrote:steve if u wnt any ply wood for nowt let me knw i,ll take u dwn to the guy

For nowt thanks Amar if you can get us some that would be great

will u be able to collect it from bradford leeds rd its in 1ft by 4ft pieces loads of it if its any good

Amar wrote:will u be able to collect it from bradford leeds rd its in 1ft by 4ft pieces loads of it if its any good

Its not too far and would come in handy thanks when is the best time I could get it?

i will ring him on monday as he bins it so i just tell him to save it for me probly friday would be best

Amar wrote:i will ring him on monday as he bins it so i just tell him to save it for me probly friday would be best

Ok thanks mate

wot do u pay for your 8x4 chipboard i can get loads at 15mm thick for 2.49 or 3,49

steve0o0o27 wrote:

HarryH wrote:I PREFER CHIPBOARD TOUNGE AND GROVE. They dont sag easy to scrape and last long time,

the first loft i used it in was in 1982 and its still as good as the day it went down

hav always used it ever since, when you scrape ply wood and the laminate flakes it digs into scrapper and lifts, it also dont dry out as quick as chipboard

I think I know which type of board you mean, they come in 8'x 2' and have some kind of sealed coat on them.

yes 8x2 18mm and 22mm £3 and £4.50 a sheet

it is treated, cheap floor 8x6 £9

Amar wrote:wot do u pay for your 8x4 chipboard i can get loads at 15mm thick for 2.49 or 3,49

alot more than that about 7.50 for 12mm thick not too sure about 15mm

let me nw if u wnt any 15mm 1s i will give u the guys number £3.25 a sheet and if u buy 10 or more £3.00 a sheet

8x4 15mm about£7 to£8 a sheet but depends on quality and whot its made for.

if its for construction its that price if its for packing and transport its very cheap

Amar wrote:let me nw if u wnt any 15mm 1s i will give u the guys number

ill have is munber mate I will be needing some boards on monday

sent u a pm steve

do u do nest boxes aswell steve or is it just lofts

We was just making lofts n kennels but things have gone abit dead with christmas so we probably going to make some this week

wot sort of price would the nest boxes be

Amar wrote:wot sort of price would the nest boxes be

Im not too sure ill let you know later this week when we make a set and see what time and cost is involved

thanks steve

Amar wrote:thanks steve

Thanks for that number too